package goby; option java_package = "edu.cornell.med.icb.goby.alignments"; option optimize_for = SPEED; /* This message is written to 'basename'.entries as a very large chunked collection. */ message AlignmentCollection { repeated AlignmentEntry alignment_entries = 1; } message AlignmentEntry { /* Multiplicity of this entry. The number of times this alignment entry would be repeated exactly the same if query redundancy had not been removed by read factorization. */ optional uint32 multiplicity = 7; /* Compressed stream of data. Removed since Goby 2.0 supports chunk codecs. Do not reuse field index 23 optional bytes compressed_data = 23; */ /* An integer that uniquely identifies the query (a short read) in a set of alignment runs. When several alignment runs are made with the same set of query sequences, equality of query index means that the query sequences were the same. (Comparing integers for equality is much faster than comparing strings.) This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 query_index = 1; /* An integer that uniquely identifies the target (e.g., a chromosome) in a set of alignment runs. When several alignment runs are made with the same set of target sequences, equality of target index means that the target sequence was the same across the runs. (Comparing integers for equality is much faster than comparing strings.) This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 target_index = 2; /* The position on the target of the start of the alignment between the query and the target. In the following example, position is 3 because the third base of the query 'C' was aligned with position 3 of the reference (two read bases were soft clipped: "ct"). This example shows that the alignment can start at a mismatch if it was so constructed by the aligner. 0123456789 AAAAGTCAAA target ctCGTC query This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 position = 3; /* True when the query matches the target on the reverse strand */ optional bool matching_reverse_strand = 6; /* The position on the query where the alignment starts. This value is different from zero when some bases/residues of the query could not be aligned with the target. TODO: Rename this to left_trim. Add a right_trim property. */ optional uint32 query_position = 5; /* The score of the alignment, where larger scores indicate better matches between the query and the target. If an aligner outputs only the number of mismatches between query and target, the score is taken to be -(#mismatches(query,target)). */ optional float score = 4; /* Number of bases/residues that differ in the alignment between query and target sequences. */ optional uint32 number_of_mismatches = 8; /* Cumulative number of insertions and/or deletions present in the alignment. */ optional uint32 number_of_indels = 9; /* Number of bases that have been aligned for the query. Please note that query_aligned_length must be less or equal to query_length. */ optional uint32 query_aligned_length = 11; /* Number of bases that have been aligned for the target. */ optional uint32 target_aligned_length = 12; repeated SequenceVariation sequence_variations = 13; /* Length of the query sequence. */ optional uint32 query_length = 10; /* Mapping Quality (phred-scaled posterior probability that the mapping position of this read is incorrect). Please note that different aligners may estimate mapping quality with different approaches, resulting in aligner specific differences in the distribution of mapping quality. It is recommended to condition mapping quality on the aligner that produced the specific alignment being processed. See aligner name and version in the header. Note that the following description is preliminary. A clear specification is needed: The mapping quality should be proportional to the log of the probability that the given mapping is the "correct" one. So if there are five equally good mappings of a read to the genome, the probability of each would be 0.2, and the mapping quality would be something like -10*log10(1-0.2) = 1. If a mapping is highly likely, say a 1e-4 of it being wrong, then the mapping quality would be -10*log10(1e-4) = 40. */ optional int32 mapping_quality = 14; /* If this read was aligned with a pair, the flags for the pair alignment (based on SAM): 000000001 paired 000000010 properly paired 000000100 read unmapped 000001000 mate unmapped 000010000 read reverse strand 000100000 mate reverse strand 001000000 first in pair 010000000 second in pair 100000000 not primary alignment */ optional uint32 pair_flags = 15; /* If there is an alignment entry for the paired read (the paired read was mapped), a link to the entry is given. */ optional RelatedAlignmentEntry pair_alignment_link = 16; /* Index of the read fragment from which this alignment was obtained. */ optional uint32 fragment_index = 17; /* If a read spans exon-exon junctions some aligners (e.g., GSNAP) will output two or more alignment entries, one for each matching part of the read, and link these entries with spliced_alignment_links. The field spliced_forward_alignment_link points to the next AlignmentEntry in the chain of spliced alignments. */ optional RelatedAlignmentEntry spliced_forward_alignment_link = 18; /* If a read spans exon-exon junctions some aligners (e.g., GSNAP) will output two or more alignment entries, one for each matching part of the read, and link these entries with spliced_alignment_links. The field spliced_backward_alignment_link points to the previous AlignmentEntry in the chain of spliced alignments. */ optional RelatedAlignmentEntry spliced_backward_alignment_link = 22; /* If a read spans exon-exon junctions some aligners (e.g., GSNAP) will output two alignment entries, one for each matching part of the read, and flag describes the spliced_alignment_link with these binary flags: 000000001 normal 000000010 novel */ optional uint32 spliced_flags = 19; /* The size of the insert used when making the sequence library. This is the total size of the DNA fragment to sequence, without the adapters. This is not the length of sequence that separates the reads. See http://seqanswers.com/forums/showthread.php?t=8730 for details. Insert size is inferred for each pair of reads by the aligner and is recorded here if was estimated (i.e., for paired-end reads). */ optional sint32 insert_size = 20; /* The sample index. Uniquely identifies the aligned sample this read was read from. Storing the sample index in the alignment entry makes it possible to concat alignments from different origins and track what sample originally contained each entry. */ optional uint32 sample_index = 21; /* The total number of times the query index associated with this entry occurs across the entire alignment file. This field is used to purge queryIndex->smallIndex associations after all instances of a queryindex have been seen (see QueryIndexPermutation class). When each entry has a value for this field, the header field query_index_occurrences is true. This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 query_index_occurrences = 25; /* The total number of times the read matches the reference across the entire alignment file. This differs from query_index_occurrences because reads that are matching through splice and pair links count as one for ambiguity. The field can be used to filter by ambiguity-threshold on the fly after an alignment has been done (to restrict entries to more smaller thresholds). When each entry has a value for this field, the header field ambiguity_stored_in_entries is true. This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 ambiguity = 27; /* List of BAM attributes, if the alignment was imported from BAM. The attributes are stored in exactly the format allowed for BAM. For instance, X0:i:9 X1:i:1 MD:Z:68 RG:Z:SRR084825 will be stored as four strings: "X0:i:9", "X1:i:1", "MD:Z:68", "RG:Z:SRR084825". Note that sam-to-compact will interpret some BAM attributes and populate goby native fields. Such tags do not appear in bam_attributes, and are instead re-generated from the corresponding goby native fields. Since Goby 2.0. */ repeated string bam_attributes = 50; /* Quality scores for all bases of the read. Since Goby 2.0. */ optional bytes read_quality_scores = 55; /* Origin index. An integer that references a ReadOriginInfo message in the alignment header and makes it possible to track the origin of the read (especially useful after several alignments have been merged/concatenated). (Since Goby 2.0). */ optional uint32 read_origin_index = 26; /* Bases that an aligner considered do not belong to the alignment of the read to the reference. Potentially erroneous bases, or bases that belong to a different part of the reference genome. Left clipped bases are stored in this field as character bases, or as an equal sign character '=' when the clipped base did match the reference base. For instance "A=G" for three soft-clipped bases, the middle one matching the genome at this position. The number of bases in softClippedBasesLeft is exactly equal to queryPosition. */ optional string softClippedBasesLeft = 30; /* Bases that an aligner considered do not belong to the alignment of the read to the reference. Potentially erroneous bases, or bases that belong to a different part of the reference genome. Right clipped bases are stored in this field as character bases, or as an equal sign character '=' when the clipped base did match the reference base. The number of bases in softClippedBasesRight is exactly equal to queryLength - queryAlignedLength - queryPosition. */ optional string softClippedBasesRight = 31; /* Quality scores for bases in softClippedBasesLeft. Stored in Phred Units. */ optional bytes softClippedQualityLeft = 32; /* Quality scores for bases in softClippedBasesRight. Stored in Phred Units. */ optional bytes softClippedQualityRight = 33; /* Sequence for a read placed near this entry, but unmapped to the reference sequence. For instance, used to record the sequence of a mate that did not map to the reference. We know that the mate maps in the proximity of this entry (it is placed) but are unable to map it to a specific genomic position. The sequence is always given as obtained from the reads file. */ optional string placedUnmappedSequence=40; /* Quality scores for a read placed near this entry. Phred units. */ optional bytes placedUnmappedQuality=41; /* Read name. In SAM/BAM this is referred to as QNAME. Paired and segmented reads will have the same Read name. */ optional string readName=42; } /* A link to another alignment entry. This message type is used to represent relations between alignments, such as the relation between the two read fragments in a paired-end protocol, or the relation between parts of reads that align through an exon exon junction and map in different locations of the genome. */ message RelatedAlignmentEntry { /* Target index of the location where the other alignment entry is mapped. This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 target_index = 1; /* Position on the reference where the other alignment entry is mapped. * This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 position = 2; /* Index of the fragment for the related alignment entry. This index makes it possible to identify which of the read fragments mapped to the given location is related to the source alignment entry. This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 fragment_index = 3; optional uint32 optimized_index=50; } /* Represents sequence variations between the query and the reference sequences. Many variations can be represented. For instance, an insertion at position 5 in the reference would be represented as from="A", to="" position=5. A mutation T->G at position 6 would be rendered as from="T", to="G" position=6. Padded alignments (see SAM description) can be described by a combination of pair-wise alignments, where the gap character '-' is used to indicate that no base exists in the sequence considered for the alignment position, for instance: - Padding example: 123 (<-positions) ref A-C A-T [from="-" to="" position=2] [from="C" to="T" position=3] ACT [from="" to="C" position=2] [from="C" to="T" position=3] A-T [from="-" to="" position=2] [from="C" to="T" position=3] - Mutation example: 123 (<-positions) ref ATT ACT [from="T" to="C" position=2] -- Example of deletion in a read: 123 (<-positions) ref ATT A-T [from="T" to="-" position=2] -- Example of insertion of two base pairs in a read: 12345 (<-positions) ref A--TT ACCTT [from="" to="CC" position=2] */ message SequenceVariation { /* The reference bases. Can include one or more gap characters '-', to indicate that the reference sequence has no base at this alignment position. This field is required (enforced by semantic validation in Goby 2.0+). */ optional string from = 2; /* The read bases that differ from the reference sequence. Can include one or more gap characters '-', to indicate that the query sequence has no base at this alignment position. This field is required (enforced by semantic validation in Goby 2.0+). */ optional string to = 1; /* The position of the variation on the read, as if the read always matched on the forward strand. Adding position to the index where the reference starts aligning the read yields the position of the variation in reference/target sequence space. Since position starts at one the resulting position will also be one based. This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 position = 3; /* The position of the variation, starting from the beginning of the aligned read (position 1), and up to the length of the read (inclusive). Use this index if you need to know how far the variation is observed from the beginning of the sequenced read. When the read has an insertion, this index records the position immediately before the base where the bases are inserted (these bases are in the to field). When the read has a deletion, read_index records the position in the read after which the bases that would align in the reference are missing (these bases are in the from field). This field is required (enforced by semantic validation in Goby 2.0+). */ optional uint32 read_index = 5; /** The read base quality scores for those bases that are given in the to field. This field is populated when the reads used to perform the search include quality scores, and when the alignment parser can extract the information from the aligner's output. (this option is currently not implemented in Goby.) */ optional bytes to_quality = 4; } /* This message is written to 'basename'.header */ message AlignmentHeader { /* The smallest possible query index in this alignment. Data stored as an array where queryIndex is the array index will be stored with only the elements in the inclusive range [smallestSplitQueryIndex largestSplitQueryIndex] Such data structures include queryLength and some arrays in the TooManyHits data structure. */ optional uint32 smallest_split_query_index = 9; /* The largest possible query index in this alignment. Data stored as an array where queryIndex is the array index will be stored with only the elements in the inclusive range [smallestSplitQueryIndex largestSplitQueryIndex] Such data structures include queryLength and some arrays in the TooManyHits data structure. */ optional uint32 largest_split_query_index = 11; /* Mapping from query identifier name to query index (as used in alignment entries). */ optional IdentifierMapping query_name_mapping = 1; /* Mapping from target identifier name to target index (as used in alignment entries). */ optional IdentifierMapping target_name_mapping = 2; /* The number of query sequences */ optional uint32 number_of_queries = 5; /* The number of target sequences */ optional uint32 number_of_targets = 6; /* The number of reads that were aligned to the reference and are represented in this alignment archive. */ optional uint32 number_of_aligned_reads = 7; /* Length of the query sequences. One number per query, in the order of increasing query index. This information has been moved to the individual alignment entries. */ repeated uint32 query_length = 3 [deprecated = true]; /* If query length is constant across all the queries, this field contains the constant length. In such cases, query_length will be empty. */ optional uint32 constant_query_length = 10; /* Length of the target sequences. One number per target, in the order of increasing target index. The target indexes must be 0..(number of targets - 1). */ repeated uint32 target_length = 8; /* Indicates whether this alignment is sorted by position. True: the alignment entries occur in sorted order, such that entry a occurs before entry b if a.targetIndex< b.targetIndex or, when entries have the same target, when a.position < b.position. */ optional bool sorted = 13; /* Indicates whether this alignment is indexed by position. When this attribute is true, a file called 'basename'.index exists that contains the AlignmentIndex message (GZip compressed). */ optional bool indexed = 14; /* True when query lengths are stored in alignment entries (Goby 1.7+). */ optional bool query_lengths_stored_in_entries = 15; /* Name of the aligner that produced this alignment. */ optional string aligner_name = 17; /* Version number for the aligner implementation that produced this alignment. */ optional string aligner_version = 18; /* The version of Goby that created this alignment file. */ optional string version = 25; /* Sample basenames, in the order of increasing sampleIndex, starting with sampleIndex=0. */ repeated string sample_basename = 30; /* This field is true when the query indices of alignment entries were permuted to smaller indices. Only sorted alignments can have query_indices_were_permuted=true. When the field is true, and you need to retrieve the original query-index of an alignment (because you want to retrieve the specific read(s) from a read file for instance), you will need the information in the permutation file (extension basename.perm) and transform back each small index of interest to the original query index. */ optional bool query_indices_were_permuted = 26; /* This field is true when entries in the alignment .entries file all have the query_index_occurrences field populated (Since Goby 2.0). */ optional bool query_index_occurrences = 35; /* This field is true when entries in the alignment .entries file all have the ambiguity field populated (Since Goby 2.0). */ optional bool ambiguity_stored_in_entries = 36; /* This field is true when entries in the alignment .entries file all have the read_quality_score field populated. (Since Goby 2.0). */ optional bool all_read_quality_scores = 40; /* A description of the origin of sets of reads. Serves a similar function to BAM read groups, but more flexible and efficient. Instead of storing strings, we use integers in the entries. Alignemnt entries will link to a specific ReadOriginInfo with the origin_index field. (Since Goby 2.0). */ repeated ReadOriginInfo read_origin = 27; } message IdentifierMapping { repeated IdentifierInfo mappings = 1; } message IdentifierInfo { required string name = 1; required uint32 index = 2; } /* A description of the origin of sets of reads. Stored in the Goby alignment header and linked from alignment entries. Goby makes it possible to adapt origin equivalence rules on the fly efficiently. To do this, it is sufficient to read the header of the alignment, decide which ReadOriginInfo instances are equivalent (e.g., by looking at sample, platform, library, or other fields in the message), then construct a function e(a):int. This function takes one originIndex parameter and returns another integer that maps to an equivalent class. The equivalence class can be used to estimate error models for entries that belong to each class, for instance. (Since Goby 2.0). */ message ReadOriginInfo { /* Origin index. An integer that links alignment entries to their origin information. */ required uint32 origin_index = 1; /* Identifier that describes the origin of the reads. This field is compatible with the ID/platform field of BAM read groups. Free text. */ required string origin_id = 2; /* The sample from which the reads were sequenced. This field is compatible with the SM/sample field of BAM read groups. Free text. */ optional string sample = 4; /* The platform on which the reads were sequenced. This field is compatible with the PL/platform field of BAM read groups. Valid values: ILLUMINA, SOLID, LS454, HELICOS and PACBIO. */ optional string platform = 5; /* The library from which the reads were sequenced. This field is compatible with the LB/library field of BAM read groups. Free text. */ optional string library = 8; /* The platform unit on which the reads were sequenced. This field for compatibility with samtools. */ optional string platform_unit = 12; /* The date the reads were sequenced. Useful to identify batch effects, in the format dd:MMM:yyyy. The month is Jan, Feb, etc. to avoid all confusion with days when day<=12. */ optional string run_date = 6; } /* This message is written to 'basename'.tmh */ message AlignmentTooManyHits { /* The threshold used by the aligner to determine that a query is ambiguous and should be dropped. Referred to as parameter k below. */ required uint32 aligner_threshold = 2; /* The hits that are assigned to several (>k) reference location. */ repeated AmbiguousLocation hits = 1; } message AmbiguousLocation { /* The index of the query that matched too many times. */ required uint32 query_index = 1; /* The number of hits that triggered membership in the too many hits list. The query may hit more locations than reported here, since some alignment tools will just drop queries that match above a threshold and stop counting. This number can be >=k. */ required uint32 at_least_number_of_hits = 2; /** The length of the part of the query sequence that could be matched to the target (also called depth). May be less than the length of the query sequence, in which case the match was not perfect. When merging alignments produced by searching different reference sequences, consider only at_least_number_of_hits from alignments that have exactly the longer depth for the query. */ optional uint32 length_of_match = 3; } /* This message is written to 'basename'.index */ message AlignmentIndex { /* Stores one element by target sequence. Each element is the cumulative target length for the target stored at index i. Assume there are four target sequences, with lengths {10, 12, 15, 34}. The field targetPositionOffsets will contain: {0,10,22,37}. Such offsets can be used to calculate the absolute position of a genomic location. Given targetIndex and positionOnReference, the absolute location is defined as targetPositionOffsets[targetIndex]+positionOnReference. */ repeated uint32 target_position_offsets = 1 [packed = true]; /* The byte offsets into the compressed entries file. Byte offsets are matched with absolute position by index. There should be as many elements in offsets as there are in absolutePosition where chunks start which represent entries whose absolute positions are less than */ repeated uint64 offsets = 2 [packed = true]; /* The absolute positions of the first entry in the chunk that immediately start at offset. One element per chunk in the 'basename'.entries file. */ repeated uint64 absolute_positions = 3 [packed = true]; }