# This is an example Reticulum config file.
# It can be used as a starting point for your own configuration.

[reticulum]
  enable_transport = true
  # When transport is disabled, the transport-facing identity is ephemeral by
  # default. Set this to true to reuse the stored identity across restarts.
  static_transport_identity = true
  # Mask local zero-hop SINGLE/LINK traffic on external interfaces.
  local_hops_delta = false
  share_instance = true
  shared_instance_port = 37428
  instance_control_port = 37429
  # Set to false to block rnstatus --attach/--detach/--reload.
  # enable_interface_management = false
  panic_on_interface_error = false

  # Packet deduplication uses a fixed-size table. "eager" prefaults its
  # payload pages at startup; "lazy" commits them as packets arrive.
  packet_hashlist_max_entries = 250000
  packet_hashlist_allocation = eager

  # Global gravity for interfaces without a specific gravity option.
  # default_gravity = 0

  # Optional mode for interfaces created from discovery announces.
  # autoconnect_interface_mode = gateway

  # Gravity assigned to interfaces created from discovery announces.
  # autoconnect_interface_gravity = 0

  # Allow auto-connected interfaces to propagate announces to internal mode.
  # autoconnect_announces_to_internal = yes

  # Allow auto-connecting discovered interfaces from unverified or experimental
  # implementations. Dangerous; leave disabled unless you understand the risk.
  # autoconnect_unverified_implementations = no

[logging]
  # Valid log levels are 0 through 8:
  #   0: Critical information only
  #   1: Errors
  #   2: Warnings
  #   3: Notices
  #   4: Information (default)
  #   5: Verbose logging
  #   6: Debug logging
  #   7: Path logging
  #   8: Extreme logging
  loglevel = 4

  # Disable timestamp inclusion when an external logging tool
  # provides its own timestamps or formatting.
  # logtimestamps = no

# ─── Interface examples ──────────────────────────────────────────────

# TCP client: connect to a remote transport node
#
# [[TCP Client]]
#   type = TCPClientInterface
#   target_host = amsterdam.connect.reticulum.network
#   target_port = 4965

# TCP server: accept incoming connections
#
# [[TCP Server]]
#   type = TCPServerInterface
#   listen_ip = 0.0.0.0
#   listen_port = 4965

# UDP interface: broadcast on LAN
#
# [[UDP Interface]]
#   type = UDPInterface
#   listen_ip = 0.0.0.0
#   listen_port = 4242
#   forward_ip = 255.255.255.255
#   forward_port = 4242

# Serial interface: point-to-point serial port
#
# [[Serial Interface]]
#   type = SerialInterface
#   port = /dev/ttyUSB0
#   speed = 115200
#   databits = 8
#   parity = none
#   stopbits = 1

# KISS interface: for TNC modems
#
# [[KISS Interface]]
#   type = KISSInterface
#   port = /dev/ttyUSB1
#   speed = 115200
#   databits = 8
#   parity = none
#   stopbits = 1
#   preamble = 350
#   txtail = 20
#   persistence = 64
#   slottime = 20
#   flow_control = false

# RNode LoRa interface
#
# [[RNode LoRa Interface]]
#   type = RNodeInterface
#   port = /dev/ttyACM0
#   frequency = 867200000
#   bandwidth = 125000
#   txpower = 7
#   spreadingfactor = 8
#   codingrate = 5

# Pipe interface: stdin/stdout of a subprocess
#
# [[Pipe Interface]]
#   type = PipeInterface
#   command = cat

# Backbone interface: TCP mesh
#
# [[Backbone]]
#   type = BackboneInterface
#   listen_ip = 0.0.0.0
#   listen_port = 4243
#   peers = 10.0.0.1:4243, 10.0.0.2:4243
 [[Default Interface]]
    type = AutoInterface
    enabled = Yes
 
 [[Hispagatos HQ]]
    type = TCPClientInterface
    interface_enabled = True
    target_host = reticulum.hispagatos.org
    target_port = 4242
    i2p_tunneled = False
    kiss_framing = False
    name = Hispagatos HQ
    selected_interface_mode = 1
    configured_bitrate = None